Legal Disclaimer

HONGKONG XIEYUAN TECH CO., LIMITED is not an authorized dealer, agent or affiliate of any of the brands or manufacturer, the products of which are offered for sale on www.hkxytech-trading.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.

Yes
HKXYTECH Schneider Variable speed drive ATV630D30N4 in stock Schneider ATV630D30N4

HKXYTECH Schneider Variable speed drive ATV630D30N4 in stock Schneider ATV630D30N4

ATV630D30N4

100% New & Original

Need a Quote?
Detailed Information

HKXYTECH Schneider Variable speed drive ATV630D30N4 in stock Schneider ATV630D30N4


Variable speed drive, Altivar Process ATV600, ATV630, 30kW/40 hp, 380...480 V, IP21/UL type 1

ATV630D30N4.JPG

HKXYTECH Schneider Variable speed drive ATV630D30N4 in stock Schneider ATV630D30N4


Embedded power measurement and energy dashboard
notification_ok
Embedded process monitoring and control
notification_ok
Stop and Go function to reduce energy consumption
notification_ok
Asset monitoring and protection
notification_ok
Drift monitoring
notification_ok
Environmental performance of the product


HKXYTECH Schneider Variable speed drive ATV630D30N4 in stock Schneider ATV630D30N4


Specifications

Packing Units
Unit Type of Package 1PCE
Number of Units in Package 11
Package 1 Weight38.0 kg
Package 1 Height55 cm
Package 1 width84 cm
Package 1 Length33 cm
Unit Type of Package 2PAL
Number of Units in Package 21
Package 2 Weight38.0 kg
Package 2 Height55 cm
Package 2 width84 cm
Package 2 Length33 cm

Main
range of productAltivar Process ATV600
product or component typeVariable speed drive
product specific applicationProcess and utilities
device short nameATV630
variantStandard version
product destinationAsynchronous motors
Synchronous motors
EMC filterIntegrated with 50 m conforming to EN/IEC 61800-3 category C2
Integrated with 150 m conforming to EN/IEC 61800-3 category C3
IP degree of protectionIP21 conforming to IEC 61800-5-1
IP21 conforming to IEC 60529
[Us] rated supply voltage380...480 V
degree of protectionUL type 1 conforming to UL 508C
type of coolingForced convection
supply frequency50...60 Hz - 5...5 %
[Us] rated supply voltage380...480 V - 15...10 %
motor power kW30 kW (normal duty)
22 kW (heavy duty)
motor power hp40 hp normal duty
30 hp heavy duty
line current53.3 A at 380 V (normal duty)
45.9 A at 480 V (normal duty)
40.5 A at 380 V (heavy duty)
35.8 A at 480 V (heavy duty)
prospective line Isc50 kA
apparent power38.2 kVA at 480 V (normal duty)
29.8 kVA at 480 V (heavy duty)
continuous output current61.5 A at 4 kHz for normal duty
46.3 A at 4 kHz for heavy duty
maximum transient current67.7 A during 60 s (normal duty)
69.5 A during 60 s (heavy duty)
asynchronous motor control profileVariable torque standard
Optimized torque mode
Constant torque standard
synchronous motor control profilePermanent magnet motor
Synchronous reluctance motor
speed drive output frequency0.1…500 Hz
nominal switching frequency4 kHz
switching frequency2...12 kHz adjustable
4...12 kHz with derating factor
safety functionSTO (safe torque off) SIL 3
discrete input logic16 preset speeds
communication port protocolEthernet
Modbus TCP
Modbus serial
option cardSlot A: communication module, Profibus DP V1
Slot A: communication module, PROFINET
Slot A: communication module, DeviceNet
Slot A: communication module, Modbus TCP/EtherNet/IP
Slot A: communication module, CANopen daisy chain RJ45
Slot A: communication module, CANopen SUB-D 9
Slot A: communication module, CANopen screw terminals
Slot A/slot B: digital and analog I/O extension module
Slot A/slot B: output relay extension module
Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link
Communication module, BACnet MS/TP
Communication module, Ethernet Powerlink
Complementary
mounting modeWall mount
network number of phases3 phases
discrete output number0
discrete output typeRelay outputs R1A, R1B, R1C 250 V AC 3000 mA
Relay outputs R1A, R1B, R1C 30 V DC 3000 mA
Relay outputs R2A, R2C 250 V AC 5000 mA
Relay outputs R2A, R2C 30 V DC 5000 mA
Relay outputs R3A, R3C 250 V AC 5000 mA
Relay outputs R3A, R3C 30 V DC 5000 mA
output voltage<= power supply voltage
permissible temporary current boost1.1 x In during 60 s (normal duty)
1.5 x In during 60 s (heavy duty)
motor slip compensationAdjustable
Automatic whatever the load
Can be suppressed
Not available in permanent magnet motor law
acceleration and deceleration rampsLinear adjustable separately from 0.01...9999 s
physical interfaceEthernet
2-wire RS 485
braking to standstillBy DC injection
protection typeThermal protection: motor
Safe torque off: motor
Motor phase break: motor
Thermal protection: drive
Safe torque off: drive
Overheating: drive
Overcurrent between output phases and earth: drive
Overload of output voltage: drive
Short-circuit protection: drive
Motor phase break: drive
Overvoltages on the DC bus: drive
Line supply overvoltage: drive
Line supply undervoltage: drive
Line supply phase loss: drive
Overspeed: drive
Break on the control circuit: drive
transmission rate10, 100 Mbits
4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
frequency resolutionDisplay unit: 0.1 Hz
Analog input: 0.012/50 Hz
transmission frameRTU
electrical connectionControl: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16
Line side: screw terminal 25...50 mm²/AWG 4...AWG 1
Motor: screw terminal 25...50 mm²/AWG 4...AWG 1
connector typeRJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
RJ45 (on the remote graphic terminal) for Modbus serial
data format8 bits, configurable odd, even or no parity
type of polarizationNo impedance
exchange modeHalf duplex, full duplex, autonegotiation Ethernet/Modbus TCP
number of addresses1…247 for Modbus serial
method of accessSlave Modbus TCP
supplyExternal supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
local signalling3 LEDs for local diagnostic
3 LEDs (dual colour) for embedded communication status
4 LEDs (dual colour) for communication module status
1 LED (red) for presence of voltage
width226 mm
height673 mm
depth271 mm
net weight28 kg
analogue input number3
analogue input typeAI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits
AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
discrete input number8
discrete input typeDI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
input compatibilityDI1...DI6: discrete input level 1 PLC conforming to EN/IEC 61131-2
DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
discrete input logicPositive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)
Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
analogue output number2
analogue output typeSoftware-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits
Software-configurable current DQ-, DQ+: 30 V DC
Software-configurable current DQ-, DQ+: 100 mA
sampling duration2 ms +/- 0.5 ms (DI1...DI4) - discrete input
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
accuracy+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
+/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AO1, AO2: +/- 0.2 % for analog output
relay output number3
relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
refresh timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
minimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC
maximum switching currentRelay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
isolationBetween power and control terminals
maximum output frequency500 kHz
maximum input current53.3 A
Variable speed drive application selectionBuilding - HVAC Compressor centrifugal
Food and beverage processing Other application
Mining mineral and metal Fan
Mining mineral and metal Pump
Oil and gas Fan
Water and waste water Other application
Building - HVAC Screw compressor
Food and beverage processing Pump
Food and beverage processing Fan
Food and beverage processing Atomization
Oil and gas Electro submersible pump (ESP)
Oil and gas Water injection pump
Oil and gas Jet fuel pump
Oil and gas Compressor for refinery
Water and waste water Centrifuge pump
Water and waste water Positive displacement pump
Water and waste water Electro submersible pump (ESP)
Water and waste water Screw pump
Water and waste water Lobe compressor
Water and waste water Screw compressor
Water and waste water Compressor centrifugal
Water and waste water Fan
Water and waste water Conveyor
Water and waste water Mixer
Motor power range AC-330…50 kW at 380…440 V 3 phases
30…50 kW at 480…500 V 3 phases
quantity per set1
enclosure mountingWall mounted

Environment
insulation resistance> 1 MOhm 500 V DC for 1 minute to earth
noise level63.5 dB conforming to 86/188/EEC
power dissipation in WNatural convection: 93 W at 380 V, switching frequency 4 kHz
Forced convection: 640 W at 380 V, switching frequency 4 kHz
volume of cooling air240 m3/h
operating positionVertical +/- 10 degree
maximum THDI<48 % from 80...100 % of load conforming to IEC 61000-3-12
electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
pollution degree2 conforming to EN/IEC 61800-5-1
vibration resistance1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
shock resistance15 gn for 11 ms conforming to IEC 60068-2-27
relative humidity5…95 % without condensation conforming to IEC 60068-2-3
ambient air temperature for operation-15…50 °C (without derating)
50…60 °C (with derating factor)
ambient air temperature for storage-40…70 °C
operating altitude<= 1000 m without derating
1000...4800 m with current derating 1 % per 100 m
standardsUL 508C
EN/IEC 61800-3
Environment 1 category C2 EN/IEC 61800-3
Environment 2 category C3 EN/IEC 61800-3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
product certificationsTÜV
ATEX INERIS
UL
CSA
ATEX zone 2/22
DNV-GL
markingCE
standardsUL 508C
EN/IEC 61800-3
EN/IEC 61800-3 environment 1 category C2
EN/IEC 61800-3 environment 2 category C3
EN/IEC 61800-5-1
IEC 61000-3-12
IEC 60721-3
IEC 61508
IEC 13849-1
overvoltage categoryIII
regulation loopAdjustable PID regulator
noise level63.5 dB
pollution degree2

SCHNEIDERBMXDDO3202K
SCHNEIDERBMXDDI6402K
SCHNEIDERBMXCPS3020
SCHNEIDERBMXDDI3202K
SCHNEIDERBMXDDO6402K
SCHNEIDERBMXFCW501S
SCHNEIDERBMXXBP0600
SCHNEIDERBMXP342020
SCHNEIDERBMXDRA0805
SCHNEIDERTM5SAI4PH
SCHNEIDERXCKMR54D1H29
SCHNEIDERXCKMR54D1H29
SCHNEIDERATV630D30N4
SCHNEIDERATV630D37N4
SCHNEIDERATV630D55N4
SCHNEIDERATV630D22N4
SCHNEIDERLV431549
SCHNEIDERLV434205
SCHNEIDERLV434202
SCHNEIDERLV429462
SCHNEIDERLV434001
SCHNEIDER29450
SCHNEIDERLV429532
SCHNEIDERLV429317
SCHNEIDERLV429387
SCHNEIDERLV431061
SCHNEIDERLV432587
SCHNEIDERLV429518
SCHNEIDERLV429331
SCHNEIDERLADN22
SCHNEIDERLA9F707
SCHNEIDERSXWASPXXX10001
SCHNEIDERATV630D30N4
SCHNEIDERATV630D37N4
SCHNEIDERATV630D55N4
SCHNEIDERATV630D22N4
SCHNEIDERLV431549
SCHNEIDERLV434205
SCHNEIDERLV434202
SCHNEIDERLV429462
SCHNEIDERLV434001
SCHNEIDER29450
SCHNEIDERLV429532
SCHNEIDERLV429317
SCHNEIDERLV429387
SCHNEIDERLV431061
SCHNEIDERLV432587
SCHNEIDERLV429518
SCHNEIDERLV429331
SCHNEIDERLADN22
SCHNEIDERLA9F707
SCHNEIDERSXWASPXXX10001
SCHNEIDERATV12H037M2
SCHNEIDERATV12H075M2
SCHNEIDERBMEP584040
SCHNEIDERBMXXBP0800
SCHNEIDERBMXCPS2010
SCHNEIDERBMXP342020
SCHNEIDERATV930C25N4C
SCHNEIDERATV930C22N4
SCHNEIDERATV930D90N4
SCHNEIDERATV930C11N4
SCHNEIDERBMEXBP0800
SCHNEIDERBMXNOM0200
SCHNEIDERBMXXBE2005
SCHNEIDER ELECTRICBMXAMO0802
SCHNEIDER ELECTRICBMXAMI0800
SCHNEIDER ELECTRICBMXFTB2800

Victor Du ( Sales Manager ) 


 

HONGKONG XIEYUAN TECH CO., LIMITED / WUHAN XIEYUAN AUTOMATION EQUIPMENT CO., LTD

 Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China

Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 18671080257 | Skype: live:victordu963

Mail: victor@whxyauto.com victor@hkxytech.com 

Website:  http://www.hkxy-instruments.com/  http://www.hkxytech-trading.com  |  GMT/UTC +8



arrow2_down


Legal Disclaimer

HONGKONG XIEYUAN TECH CO., LIMITED is not an authorized dealer, agent or affiliate of any of the brands or manufacturer, the products of which are offered for sale on www.hkxytech-trading.com. All trademarks, brand names, and logos mentioned are used for identification purposes only and are registered trademarks of their respective owners who reserve the rights of ownership. The use of trademark, brand name or product on our website is not intended to suggest that the company, trademark or brand is affiliated to or endorses our website. All products are 100% original, genuine and legally purchased from authorized sources.